Installing the TSNAMI 2 sound decoder into the ARM 3806 and adding Pickups and Lights | |||
Installing the Tsunami PNP8 sound decoder in the
On Track Models 82 Class. |
A photos of what to use and how to sold to the bottom of the rail. | ||
Complete notes from the Decoder Pro Clinic given October 2018. | Clinic notes on track laying - the easy way. | ||
Step by step photos of how to install a TSU 2 steam decoder in the Austrains 30 Class Tank. | Step by step photos of how to install a TSU 2 PNP Alco decoder in the Train-O-Rama 48 class. | ||
Clinic notes on setting your decoder the way YOU want it not for Claude down at the club. Using Decoder Pro. | Clinic Notes on setting the performance of your Tsunami Diesel Decoder. Using Decoder Pro. | ||
How to wire your Program Track safely. | How to connect your CVP Easydcc system to JMRI in easy steps. | ||
A few photos installing a sound decoder and some photos of finished units. | Clinic Notes from Martyn Jenkins' clinic on setting up WiThrottles for you system. | ||
General tip for DCC friendly and reliable operation of common turnouts. | Fitting class lights and numberboard lights to F3 and F7 locos for DCC operation. | ||
Adding sound to a Bachmann On30 railbus that has been converted to On3 - Econami -UK. | Fitting non sound and then sound decoders to the Wombat 30T loco | ||
How to add pickups to brass locos for reliable and enjoyable running. | How to add extra pickups to these locos for reliable running under all conditions. | ||
How to replace split gears in the P2K locos with 4 wheel trucks. | Adding extra pickups to the early P2K 0-8-0 locos and any other plastic tender trucks | ||
Shows how to connect wires to the Tsunami 2 PNP sound decoder. | General hints on what to remove and what to connect when installing a decoder. | ||
Fitting Surface Mounted Devices such as LEDs and Resistors to locos for lighting. | Fitting SG90 servos and using Accessory Decoders for turnout and signal operation. | ||
Adding pickups and lights to the NSW SHG brake van then adding a lighting decoder to control them. | Using assorted LEDs in numerous places to add that little extra to you locos. | ||
Adding sound to a 1974 Brass Big Boy (O Scale) using the WOW 501 decoder. | Adding lights and a decoder to the Bachmann Tamper track car. | ||